View N141XC-L02_1582832.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 1 / 28 version 1.1 www..net
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 2 / 28 version 1.1 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 9 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 13 5.1 tft lcd module 5.2 backlight unit 5.3 timing diagram of lvds input signal 5.4 color data input assignment 5.5 edid data structure 6. interface timing ------------------------------------------------------- 20 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 22 7.1 test conditions 7.2 optical specifications 8. precautions ------------------------------------------------------- 25 8.1 handling precautions 8.2 storage precautions 8.3 operation precautions 9. packing ------------------------------------------------------- 26 9.1 carton 9.2 pallet 10. definition of labels ------------------------------------------------------- 27 10.1 cmo module label 10.2 carton label
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 3 / 28 version 1.1 revision history version date page (new) section description ver 1.0 ver 1.1 dec. 7. ?05 jan. 18. ?05 all 22 27 28 28 all 7 9 10 10 preliminary specification was first issued. update optical specification. update carton and pallet. outline drawing. update carton label.
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 4 / 28 version 1.1 1 general description 1.1 overview n141xc -l02 is a 14.1? tft liquid crystal display module with single ccfl backlight unit and 30 pins lvds interface. this module supports 1024 x 768 xga mode and can display 262,144 colors. the optimum viewing angle is at 6 o?clock direction. the inverter module for backlight is not built in. 1.2 features - thin and light weight - xga (1024 x 768 pixels) resolution - de (data enable) only mode - 3.3v lvds (low voltage differential signaling) interface with 1 pixel/clock - support edid structure version 1 revision 3 1.3 application - tft lcd notebook 1.4 general specificati0ns item specification unit note outline dimension 299(w) x 228 (h) mm active area 285.7 (h) x 214.3 (v) (14.1? diagonal) mm bezel opening area 288.9 (h) x 217.5 (v) mm (1) driver element a-si tft active matrix - - pixel number 1024 x r.g.b. x 768 pixel - pixel pitch 0.279 (h) x 0.279 (v) mm - pixel arrangement rgb vertical stripe - - display colors 262,144 color - transmissive mode normally white - - surface treatment hardness (3h), anti-glare (haze 26) - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 298.5 299.0 299.5 mm vertical(v) 227.5 228.0 228.5 mm module size depth(d) 4.9 5.2 5.5 mm (1) weight 400 415 g - i/f connector mounting position the mounting in clination of the connector makes the screen center within 0.5mm as the horizontal. (2) note (1) please refer to the attached drawings for more information of front and back outline dimensions. (2) connector mounting position
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 5 / 28 version 1.1 2 absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 200/2 g/ms (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) note (1) (a) 90 %rh max. (ta Q 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel display surface area should be 0 oc min. and 60 oc max. note (3) 1 time for x, y, z. for condition (200g / 2ms) is half sine wave,. note (4) 10 ~ 500 hz, 30 min/cycle,1cycles for each x, y, z axis. note (5) at testing vibration and shock, the fixt ure in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. the fixing condition is shown as below: side mount fixing screw side mount fixing screw stage bracket lcd module gap=2mm a t room tem p erature storage range relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 10 90
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 6 / 28 version 1.1 note (5) at testing vibration and shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage vcc -0.3 +4.0 v logic input voltage v in -0.3 vcc+0.3 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l - 2.5k v rms (1), (2), i l = (6.0) ma lamp current i l (3.0) 6.5 ma rms lamp frequency f l (50) 80 khz (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (refer to section 3.2 for further information).
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 7 / 28 version 1.1 3 electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 3.0 3.3 3.6 v - ripple voltage v rp - - 100 mv - rush current i rush - - 1.5 a (2) white - 270 ma (3)a black - 330 ma (3)b power supply current vertical stripe lcc - 350 ma (3)c ?h? level v ih - - +100 mv - differential input voltage for lvds receiver threshold ?l? level v il -100 - - mv - terminating resistor r t - 100 - ohm - power per ebl wg p ebl - tbd - w (4) note (1) the module should be always operated within above ranges. note (2) measurement conditions: vcc rising time is 470us 470us +3.3v gnd 0.9vcc 0.1vcc r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input)
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 8 / 28 version 1.1 note (3) the specified power supply current is under the conditions at vcc = 3. 3 v, ta = 25 2 oc, dc current and f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the specified power are the sum of lcd p anel electronics input power and the inverter input power. test conditions are as follows. (a) vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, (b) the pattern used is a black and white 32 x 36 checkerboard, slide #10 0 from the vesa file ?flat panel display monitor setup patterns?, fpdmsu.ppt. (c) luminance: 60 nits. (d) the inverter used is provided from o2micr o (www.o2micro.com). please contact o2mirco for detail information. cmo doesn?t provide the inverter in this product. active area a. white pattern active area b. black pattern
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 9 / 28 version 1.1 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l (560) (620) (680) v rms i l = 6.0 ma lamp current i l (3.0) (6.0) (6.5) ma rms (1) , (8) - - (1300(25 o c) ) v rms (2) lamp turn on voltage v s - - (1450 (0 o c)) v rms (2) operating frequency f l (50) - 80 khz (3) power consumption p l - (3.72) - w (4), i l = 6.0 ma lamp life time l bl 12,000 - - hrs (5) leakage current i in -i out - (1.0) (1.25) ma (7) note (1) lamp current is measur ed by utilizing a high frequency current meter as shown below: note (2) the voltage shown above should be applied to the lamp for more than 1 second after startup. otherwise the lamp may not be turned on. note (3) the lamp frequency may generate interferen ce with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal sy nchronous frequency and its harmonics as far as possible. note (4) p l = i l v l note (5) the lifetime of lamp is defined as the time wh en it continues to operate under the conditions at ta = 25 2 o c and i l = 6.0 ma rms until one of the following events occurs: (a) when the brightness becomes Q 50% of its original value. (b) when the effective ignition length becomes Q 80% of its original value. (effective ignition length is defined as an area that the brightness is less than 70% compared to the center point.) note (6) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid generating too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within 2 10%; lcd module 1 inverter a current meter hv (pink) lv (white) 2
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 10 / 28 version 1.1 c. the ideal sine wave form shall be symmetric in positive and negative polarities. note (7) the lamp leakage current is measured by the current difference between in and out. and the measurement condition is as below: note (8) about operating current min 2.0ma , lamp maker has some advice as below : explanation and comparison of the kind of tone light: lamp current wave-like by the adjustment of the current. lcd module lamp inverter current probe low high fg i high i low gnd current probe i leak(rms) = i high(rms) - i low(rms) i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms (reference) light quan tity adjustment method tone light p-p level down
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 11 / 28 version 1.1 lamp current wave-like by the adjustment of the burst. comparative table method backlight efficiency (inv lamp) tone light rate (%) circuitry current good ( 75 % ? 85% ) 58 complicated burst bad ( 65 % ? 75% ) 10 easy method of case that lamp curre nt min2.0ma is controlled. it is the setting of minimum 2.0ma (min) to lamp current 6.0ma in the lamp specification. the burst is excellent for circuitry. the marker proposes that pays attention to the following contents. the attention point of the light with a touch of the burst: do not to be spark at start. pwm frequency does so that the frequency that is not able to divide the fixed number time, fixed number to lamp drive frequency is selected. (it is due to resonance noise occurrence prevention. ) even the frequency that is using it for lcd avoids selecting it. p-p level = on:80% off:20% spark n g good
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 12 / 28 version 1.1 4 block diagram 4.1 tft lcd module 4.2 backlight unit v edid vcc 1 hv (white) 2 lv ( black ) data edid gnd v l clk(+/-) rxin2(+/-) rxin1(+/-) rxin0(+/-) tft lcd panel (1024x3x768) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage generator input connector (jae-fi-xb30s-hf10) lamp connector (jst-bhsr-02vs-1) edid eeprom clk edid
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 13 / 28 version 1.1 5 input terminal pin assignment 5.1 tft lcd module pin symbol description polarity remark 1 vss ground 2 vcc power supply +3.3 v (typical) 3 vcc power supply +3.3 v (typical) 4 v edid ddc 3.3v power ddc 3.3v power 5 nc non-connection 6 clk edid ddc clock ddc clock 7 data edid ddc data ddc data 8 rxin0- lvds differential data input negative 9 rxin0+ lvds differential data input positive r0~r5,g0 - 10 vss ground 11 rxin1- lvds differenti al data input negative 12 rxin1+ lvds differential data input positive g1~g5,b0,b1 - 13 vss ground 14 rxin2- lvds differential data input negative 15 rxin2+ lvds differential data input positive b2~b5,de,hsync,vsync 16 vss ground 17 clk- lvds clock data input negative 18 clk+ lvds clock data input positive lvds level clock 19 vss ground 20 nc non-connection 21 nc non-connection 22 vss ground 23 nc non-connection 24 nc non-connection 25 vss ground 26 nc non-connection 27 nc non-connection 28 vss ground 29 nc non-connection 30 nc non-connection note (1) the first pixel is even. note (2) connector part no.: jae- fi-xb30srl-hf11 or equivalent note (3) user?s connector part no: jae-fi-x30m or equivalent 5.2 backlight unit pin symbol description color 1 hv high voltage white 2 lv ground black note (1) connector part no.: jst-bhsr-02vs-1 or equivalent note (2) user?s connector part no.: jst-sm02b-bhss-1-tb or equivalent
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 14 / 28 version 1.1 5.3 timing diagram of lvds input signal in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 g0 r3 r2 r1 r0 r5 r4 b1 g4 g3 g2 g1 b0 g5 de b5 b4 b3 b2 vsync hsync t/7 signal for 1 dclk cycle (t) rxin0 rxin1 rxin2 clk+
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 15 / 28 version 1.1 5.4 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 6-bit gray scale data input for the color. the higher the binary input the brighter the color. the table below provides the assignment of color versus data input. data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0)/dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0)/dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 16 / 28 version 1.1 5.5 edid data structure the edid (extended display identification data) data formats are to support displays as defined in the vesa plug & display and fpdi standards. byte # (decimal) byte # (hex) field name and comments value (hex) value (binary) 0 0 header 00 00000000 1 1 header ff 11111111 2 2 header ff 11111111 3 3 header ff 11111111 4 4 header ff 11111111 5 5 header ff 11111111 6 6 header ff 11111111 7 7 header 00 00000000 8 8 eisa id manufacturer name (?cmo?) 0d 00001101 9 9 eisa id manufacturer name (compressed ascii) af 10101111 10 0a id product code 20 00100000 11 0b id product code 14 00010100 12 0c id s/n (fixed ?0?) 00 00000000 13 0d id s/n (fixed ?0?) 00 00000000 14 0e id s/n (fixed ?0?) 00 00000000 15 0f id s/n (fixed ?0?) 00 00000000 16 10 week of manufacture (fixed week code) 01 00000001 17 11 year of manufacture (fixed year code) 10 00010000 18 12 edid structure version # (?1?) 01 00000001 19 13 edid revision # (?3?) 03 00000011 20 14 video i/p definition (?digital?) 80 10000000 21 15 max h image size (?28cm?) 1c 00011100 22 16 max v image size (?21cm?) 15 00010101 23 17 display gamma (gamma = ?2.2?) 78 01111000 24 18 feature support (?active off, rgb color?) 0a 00001010 25 19 red/green (rx1, rx0, ry1, ry0, gx1, gx0, gy1, gy0) f4 11110100 26 1a blue/white (bx1, bx0, by1, by0, wx1, wx0, wy1, wy0) 85 10000101 27 1b red-x (rx = ?0.573?) 92 10010010 28 1c red-y (ry = ?0.335?) 55 01010101 29 1d green-x (gx = ?0.325?) 53 01010011 30 1e green-y (gy = ?0.57?) 92 10010010 31 1f blue-x (bx = ?0.15?) 26 00100110 32 20 blue-y (by = ?0.125?) 20 00100000 33 21 white-x (wx = ?0.313?) 50 01010000 34 22 white-y (wy = ?0.329?) 54 01010100 35 23 established timings 1 00 00000000 36 24 established timings 2 08 00001000 37 25 manufacturer?s reserved timings 00 00000000 38 26 standard timing id # 1 01 00000001 39 27 standard timing id # 1 01 00000001
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 17 / 28 version 1.1 40 28 standard timing id # 2 01 00000001 41 29 standard timing id # 2 01 00000001 42 2a standard timing id # 3 01 00000001 43 2b standard timing id # 3 01 00000001 44 2c standard timing id # 4 01 00000001 45 2d standard timing id # 4 01 00000001 46 2e standard timing id # 5 01 00000001 47 2f standard timing id # 5 01 00000001 48 30 standard timing id # 6 01 00000001 49 31 standard timing id # 6 01 00000001 50 32 standard timing id # 7 01 00000001 51 33 standard timing id # 7 01 00000001 52 34 standard timing id # 8 01 00000001 53 35 standard timing id # 8 01 00000001 54 36 detailed timing description # 1 pixel clock (?65 mhz?) 64 01100100 55 37 # 1 pixel clock (hex lsb first) 19 00011001 56 38 # 1 h active (?1024?) 00 00000000 57 39 # 1 h blank (?320?) 40 01000000 58 3a # 1 h active : h blank (?1024 : 320?) 41 01000001 59 3b # 1 v active (?768?) 00 00000000 60 3c # 1 v blank (?38?) 26 00100110 61 3d # 1 v active : v blank (?768 : 38?) 30 00110000 62 3e # 1 h sync offset (?24?) 18 00011000 63 3f # 1 h sync pulse width (?136?) 88 10001000 64 40 # 1 v sync offset : v sync pulse width (?3 : 6?) 36 00110110 65 41 # 1 h sync offset : h sync pulse width : v sync offset : v sync width (?24 : 136 : 3 : 6?) 00 00000000 66 42 # 1 h image size (?285 mm?) 1d 00011101 67 43 # 1 v image size (?214 mm?) d6 11010110 68 44 # 1 h image size : v image size (?285 : 214?) 10 00010000 69 45 # 1 h boarder (?0?) 00 00000000 70 46 # 1 v boarder (?0?) 00 00000000 71 47 # 1 non-interlaced, normal, no stereo, separate sync, h/v pol negatives 18 00011000 72 48 detailed timing description # 2 00 00000000 73 49 # 2 flag 00 00000000 74 4a # 2 reserved 00 00000000 75 4b # 2 fe (hex) defines ascii string (model name ?N141XC-L02?, ascii) fe 11111110 76 4c # 2 flag 00 00000000 77 4d # 2 1st character of name (?n?) 4e 01001110 78 4e # 2 2nd character of name (?1?) 31 00110001 79 4f # 2 3rd character of name (?4?) 34 00110100 80 50 # 2 4th character of name (?1?) 31 00110001 81 51 # 2 5th character of name (?x?) 58 01011000 82 52 # 2 6th character of name (?c?) 43 01000011 83 53 # 2 7th character of name (?-?) 2d 00101101 84 54 # 2 8th character of name (?l?) 4c 01001100
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 18 / 28 version 1.1 85 55 # 2 9th character of name (?0?) 30 00110000 86 56 # 2 10th character of name (?2?) 32 00110010 87 57 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 88 58 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 89 59 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 90 5a detailed timing description # 3 00 00000000 91 5b # 3 flag 00 00000000 92 5c # 3 reserved 00 00000000 93 5d # 3 fe (hex) defines ascii string (vendor ?cmo?, ascii) fe 11111110 94 5e # 3 flag 00 00000000 95 5f # 3 1st character of string (?c?) 43 01000011 96 60 # 3 2nd character of string (?m?) 4d 01001101 97 61 # 3 3rd character of string (?o?) 4f 01001111 98 62 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 99 63 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 100 64 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 101 65 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 102 66 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 103 67 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 104 68 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 105 69 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 106 6a (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 107 6b (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 108 6c detailed timing description # 4 00 00000000 109 6d # 4 flag 00 00000000 110 6e # 4 reserved 00 00000000 111 6f # 4 fe (hex) defines ascii string (model name?N141XC-L02?, ascii) fe 11111110 112 70 # 4 flag 00 00000000 113 71 # 4 1st character of name (?n?) 4e 01001110 114 72 # 4 2nd character of name (?1?) 31 00110001 115 73 # 4 3rd character of name (?4?) 34 00110100 116 74 # 4 4th character of name (?1?) 31 00110001 117 75 # 4 5th character of name (?x?) 58 01011000 118 76 # 4 6th character of name (?c?) 43 01000011 119 77 # 4 7th character of name (?-?) 2d 00101101 120 78 # 4 8th character of name (?l?) 4c 01001100 121 79 # 4 9th character of name (?0?) 30 00110000 122 7a # 4 10th character of name (?2?) 32 00110010
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 19 / 28 version 1.1 123 7b (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 124 7c (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 125 7d (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 126 7e extension flag 00 00000000 127 7f checksum f7 11110111
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 20 / 28 version 1.1 6 interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc - 65 68 mhz - vertical total time tv 770 806 818 th - vertical addressing ti me tvd 768 768 768 th - horizontal total time th 1094 1344 1364 tc - de horizontal addressing time thd 1024 1024 1024 tc - input signal timing diagram t h t c dclk t hd t vd t v de de data
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 21 / 28 version 1.1 6.2 power on/off sequence timing specifications: 0.5ms issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 22 / 28 version 1.1 7 optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v input signal according to typical val ue in "3. electrical characteristics" inverter current i l 6.0 ma inverter driving frequency f l 61 khz inverter sumida-h05-4915 the measurement methods of opt ical characteristics are shown in section 7.2. the following items should be measured under the test conditions describ ed in section 7.1 and stable environment shown in note (6). 7.2 optical specifications item symbol condition min. typ. max. unit note contrast ratio cr (300) (450) - - (2), (5) t r - (5) (10) ms response time t f - (11) (16) ms (3) luminance of white l ave (150) (180) - cd/m 2 (4), (5) white variation of 5 points w - - (1.25) - (5), (6) rx (0.573) - red ry (0.333) - gx (0.328) - green gy (0.570) - bx (0.154) - blue by (0.134) - wx (0.313) - color chromaticity white wy x =0 , y =0 viewing normal angle typ -0.03 (0.329) typ +0.03 - x + (40) (45) - horizontal x - (40) (45) - y + (10) (15) - viewing angle vertical y - cr 10 (30) (35) - deg. (1)
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 23 / 28 version 1.1 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l63 / l0 l63: luminance of gray level 63 l 0: luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): dfr 100% 90% 10% 0% gray l evel 63 gray l evel 0 gray l evel 63 time t f optical response t r 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x- x+ y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 66.67 ms 66.67 ms
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 24 / 28 version 1.1 note (4) definition of average luminance of white (l ave ): measure the luminance of gray level 63 at 5 points l ave = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (6). note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. note (6) definition of white variation ( w): measure the luminance of gray level 63 at 5 points w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] photometer (ca210, cs-1000) field of view = 2o 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux) d w active area vertical line horizontal line : test point x=1 to 5 5 1 2 3 4 d/4 d/2 3d/4 w/4 w/2 3w/4 x
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 25 / 28 version 1.1 8 precautions 8.1 handling precautions (1) the module should be assembled into the system fi rmly by using every mounting hole. be careful not to twist or bend the module. (2) while assembling or installing modules, it can only be in the clean area. the dust and oil may cause electrical short or damage the polarizer. (3) use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) do not press or scratch the surface harder than a hb pencil lead on the panel because the polarizer is very soft and easily scratched. (5) if the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might permanently damage the polarizer due to chemical reaction. (6) wipe off water droplets or oil immediately. staining and discoloration may occur if they left on panel for a long time. (7) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contacting with hands, legs or clothes , it must be washed away thoroughly with soap. (8) protect the module from static electricity, it may cause damage to the c-mos gate array ic. (9) do not disassemble the module. (10) do not pull or fold the lamp wire. (11) pins of i/f connector should not be touched directly with bare hands. 8.2 storage precautions (1) high temperature or humidity may reduce the perfo rmance of module. please store lcd module within the specified storage conditions. (2) it is dangerous that moisture come into or co ntacted the lcd module, because the moisture may damage lcd module when it is operating. (3) it may reduce the display quality if the ambient te mperature is lower than 10 oc. for example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. 8.3 operation precautions (1) do not pull the i/f connector in or out while the module is operating. (2) always follow the correct power on/off sequence when lcd module is connecting and operating. this can prevent the cmos lsi chips from damage during latch-up. (3) the startup voltage of backlight is approximately 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit.
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 26 / 28 version 1.1 9 packing 9.1 carton 9.2 pallet
issued date: jan.25, 2006 model no.: n141xc -l02 preliminary 27 / 28 version 1.1 10 definition of labels 10.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. made in taiwan e207943 n141x5 - l03 rev.xx x x x x x x x y m d l n n n n c p 1 3 5 4 4 8 - 0 1 01a (a) model name: n141xc - l02 (b) revision: rev. xx, for example: a1, ?, c1, c2 ?etc. (c) serial id: x x x x x x x y m d x n n n n serial id includes the information as below: (a) manufactured date: year: 1~9, for 2001~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i , o and u (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product 10.2 carton label n1 41xc - l02 year, month, date cmo internal use revision serial no. cmo internal use cmo internal use n 141xc-l02 site of mfg

▲Up To Search▲

Price & Availability of N141XC-L02

	To Download N141XC-L02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .